Highlights


SENSOdive-IoT-compact

SENSOdive recorder with LoRaWAN®

The SENSOdive measuring system uses LoRaWAN® technology (Long Range Area Network) and can therefore transmit data to the gateway at close range without using a mobile phone provider. From here, the data can be transmitted to the server via Ethernet or 2/3/4 G technology. The LoRaWAN® technology is extremely energy efficient; a battery life of up to several years can be achieved. An additional advantage is that the signal easily transmits through buildings and is able to transfer data from under-floor measuring points. This technology is ideal for building up your own networks.

For more information about data logger click here.

For more information about software SENSOweb click here.

To request more information and prices call +49 351/88646-00 or e-mail us: info@uit-gmbh.de.

 Technical data – Multi parameter probe
  Number of parameters:   3 sensors plus water level and temperature installable
  Conductivity sensor:   Range 0 … 0,2/2/20/200 mS/cm; resolution 1 μS/cm
  automatic range switching – graphite electrode
  pH-Wert:   Range 1 … 14, resolution ΔpH = 0,01
  Redox potential (ORP):   Range –2000 … +2000 mV, resolution 1 mV
  Combi-sensor pH/Redox:   Range 1 … 14; range –2000 … +2000 mV
  Oxygen [O2]:   0 … 40 mg/l O2, resolution 0,01 mg/l O2 – LDO measurement principle
  Water level:   0-20 mWs, 0-50 mWs, 800-2100 mbar, 800-6100 mbar
  Temperature sensor:   Range: 0 ... 50°C, resolution 0,04°C
  Material:   Stainless steel; POM; PUR, EPDM, NBR, PE plus Sensor material
  Operating temperature:   0-40°C no frozen water
  Probe cable:   PUR, PE – Option internal air pressure capillary
 Technical data – data logger LogTrans IoT-compact
  Dimensions:   Diameter 48 mm, length 700 mm
  Material:   Stainless steel/ plastic
  Protection degree:   Option 1 – with air pressure membrane: IP 65
  Option 2 – without air pressure membrane: IP 68
  Option 3 – with air pressure sensor 800-1200 mbar : IP 68
  Temperature:   -25°C ... 70°C – no frozen water
  Storage:   512 MB – suitable 1.000.000 data sets
  Power supply:   2 lithium batteries 3,6V/ 13 Ah
 or 4 Alkaline Baby 1,5 V – 3 Ah or
  3 Li-accumulators 5,2 Ah – will be defined with the quotation
  Wireless data transfer:   LoRaWAN™ modem
  Standard antenna:   1 dB
  External antenna:   Option: Mountable with the same protection degree
  Interface:   USB for parameterization for system or read out of data
Data transmission – receiver stations
  Gateway LoRaWAN™   Integration in existing LoRaWAN gateways with downstream external infrastructure from third-party providers

Detailed technical data of sensors, see specific data sheets

Illustrations and descriptions may vary. The plant / product is subject to change depending on technical updates.

We will gladly give you an individual offer.

Anfrageformular


Latest modification: 23.09.2022